Racks & Storage Systems

FEATURESRHINO-RACKSince 1992 Rhino-Rack has proven to be Australia's most diverse roof rack company, with a range of rack systems to suit everyone from the weekend warrior, overlander,off-roader, and ladder-carrying tradesman alike. Our objective is to...

The Vortex Ladder Strap suits lets you secure your ladder quickly and safely using it's camloc ladder strap. It saves you time and money, no more hunting around trying to find some cable or tape to secure your ladder. The strap length is 500mm with all...

The Rhino-Rack Vortex Load Holder is designed so that you can secure your load in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks.FEATURESLoad HolderSecure Your LoadRHINO-RACKSince 1992 Rhino-Rack...

The two-in-one designed large ladder peg allows you to support your ladder from sliding as well as providing a tie off point when you are securing your load. The large pegs are 210mm/8.3in height and feature an eye bolt head to allow easy tie off. Comes...

The Rhino-Rack Load Holder is designed so that you can secure your load in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks.FEATURESLoad HolderSecure Your LoadRHINO-RACKSince 1992 Rhino-Rack has...

The Rhino-Rack Alloy Roller is a great way to get your ladders on and off your Rhino-Rack Heavy Duty roof racks with only a small amount of effort required. It is also a cost effective way of getting your ladder on your racks without a full ladder system...

Made from galvanized steel, these 100mm (4") pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex bar, and are secured in place with an M8 bolt and nyloc nut.FEATURESSuitable For Use With Rhino-Rack 100mm/4 in. Conduit...

Rhino-Rack has designed a new conduit locking end cap that is a game changer. This end cap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your...

The BC2 Conduit Clamp Set will adapt a 100mm (4") Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.FEATURES Allows Fitting of 100mm/4 in. Conduit Carriers to Rhino HD...

The Rhino-Rack Wind Fairing has been engineered to minimise wind noise whilst driving. Hearing the whistle of wind running through the load you're transporting can take away the fun of driving. The Rhino-Rack Wind Fairing deflects air around your load...

The Rhino-Rack Wind Fairing has been engineered to minimise wind noise whilst driving. Hearing the whistle of wind running through the load you're transporting can take away the fun of driving. The Rhino-Rack Wind Fairing deflects air around your load...

Wrap Pads are uniquely designed to fit the bars between the planks of the Pioneer range of Trays and Platforms. The Pioneer Wrap Pads are used to provide protection for both your gear and the Pioneer system.The Pioneer Wrap Pads are sold in a pair and...

The VA Underside Tie Down Point is the perfect accessory to complement your Rhino-Rack Vortex crossbar system by creating a secure tie down point for your straps. Being discretely installed on the underside of the crossbar frees up space on your...

The RTD35P Rapid Straps are suitable for heavy duty use and feature a unique design registered Buckle Protector. Designed to encase the metal cam buckle, the Buckle Protector is made from injection molded, TPV rubber and provides maximum protection to...

The RBAS2 is tie down strap with an anchor strap designed to wrap around the nose/tail of a stand up paddleboard. They are quick and easy to fit and provides an anchor point for long loads when no tie off points are available.FEATURESIncludes 1 Bonnet...

The RBAS1 includes a 3.6m tie down strap with an anchor point strap designed to wrap around and protect kayaks or objects without a front or rear tie off point. They are quick and easy to fit and provides an anchor point for long loads when no tie off...

Designed to be quick and easy to attach, the Bonnet Anchor Strap provides an anchor point for long loads when no other tie off points are available. It can be used for both bonnet and boot - simply place the strap inside these areas and make sure the...

Add extra stability when transporting your long kayak or canoe with the Rhino-Rack Anchor Strap. The Rhino-Rack Anchor Straps are attached underneath the bonnet of your vehicle and allows you to feed through Rhino-Rack Tie Down Straps or a rope over your...

The Rhino-Rack Load Holder is designed so that you can secure your load in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks. The RLH1 is designed to fit Rhino-Rack's Heavy Duty Bars...

The Rhino-Rack T-Loader is a hitch mounted device that provides an easy method for 1 person to load and unload a Kayak, SUP, ladder or any other long, heavy objects on to the roof of a vehicle. Simply lower the T-Loader to its angled position away from...