Description
If you're looking lighting setup that's hidden behind your grill then this is the kit for you! This bolt-on kit allows you to run 6x 3" Pod Lights behind the grill of your F-150, giving you a tremendous amount of light down range. The include KR Off-Road brackets are made from stainless steel here in the USA (and powder coated black) and allow you to mount your lights in a variety of ways. The mounting channels on the KR Off-Road brackets ensure you can install the lights in a variety of ways. If you prefer to keep the lights lower in the grill, you got it! Maybe you want the lights up higher, no problem. The vertical alignment channels allow for this flexibility.
We also make wiring easy with the optional CrystaLux wiring harness. This harness has 6x connectors on it that plug directly into the lights. The other end of the harness has 3 wires (plus a ground) that you can wire to an existing upfitter switch (or switch panel). Each pair of lights can operate independently on it's own switch allowing you to turn on lights for whatever the road condition is ahead of you
NOTE: This product will require the removal of some of the active shutters in your grill. Actual height adjustment may be limited depending on your grill design (non-Raptors may require the lights to sit higher behind a grill then on a Raptor). Your grill must have an active shutter system.
INCLUDES:
- 1x Pair of KR Off-Road Brackets
- Mounting Hardware
- Instructions
- Our Lifetime Guarantee. For as long as you own your F150, if you manage to break/bend/destroy the KR Off-Road brackets we'll replace them free of charge (not including return shipping)
FITMENT:
- 2015+ Ford F-150 (including Raptor)
NOTE: Lights sold separately. If you are looking to buy a complete kit you can do so here:
- Baja Designs 6x Light Grill Kit w/KR Off-Road Brackets for 2015+ Ford F-150
- Diode Dynamics 6x SS3 Light Grill Kit w/KR Off-Road Brackets for 2021+ Ford F-150
- Baja Designs 2x Light Bar Grill Kit w/KR Off-Road Brackets for 2021+ Ford F-150
Optional Wiring Harness: Add our optional wiring harness which will allow you to connect your lights to your OEM upfitters.
- Baja Designs: This harness has 3x Weatherpack (WP) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Baja Designs lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal)
- Diode Dynamics (3x SS3 without Backlight): This harness has 3x Deutsch (DT) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Diode Dynamics SS3 lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal)
- Diode Dynamics (3x SS3/SSC2 with Backlight): This harness has 3x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 3 pairs of Diode Dynamics SS3/SSC2 lights with backlight. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SS3/SSC2 back-light control cable (which activates the back-light on all of the SS3/SSC2 lights).
- Diode Dynamics (2x SS3 & 1x SSC2): This harness has 2x Deutsch (DT) 2-pin connectors & 1x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 2 pairs of Diode Dynamics SS3 lights & 1 pair of Diode Dynamics SSC2 lights. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SSC2 back-light control cable (which activates the back-light on all of the SSC2 lights).
- Diode Dynamics (1x SS3 & 2x SSC2): This harness has 1x Deutsch (DT) 2-pin connectors & 2x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 1 pair of Diode Dynamics SS3 lights & 2 pairs of Diode Dynamics SSC2 lights. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SSC2 back-light control cable (which activates the back-light on all of the SSC2 lights).
- Rigid Industries D-Series: This harness has 3x Deutsch (DT) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Rigid Industries D-Series lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal).
- Rigid Industries Radiance: This harness has 9x (on each side) weatherproof/heat shrinkable wires which terminate onto the Rigid Industries Radiance Light wires. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the Radiance back-light control cable (which activates the back-light on all of the Radiance lights).
