Description
Looking to get dust lights or reverse lights for your vehicle? We've got you covered with this Baja Designs Reverse Kit. This kit comes with lights, brackets and wiring harness making it a breeze to get rear facing light setup on your truck! Everything you need in one kit.
This is a completely bolt-on kit offering a simple plug and play installation (if your truck is equipped with a 7-pin trailer harness with a disconnect on the inside of the bumper). The kit utilizes a 7-pin dual-output trailer wiring harness, which plugs in-line with your existing trailer harness behind your hitch. This configuration ensures you retain functionality of your trailer harness while keeping the plug behind the trailer hitch out of sight. Completely plug and play!
The included KR Off-Road extension bracket allows the lights to hang from factory bolts under your truck. This bracket is made right here in the USA out of 11 gauge stainless steel (and powder coated black) ensuring a lifetime of durability.
INCLUDES
- 2x Baja Designs Lights
- 2x KR Off-Road mounting brackets
- 1x 7-Pin Dual Output Trailer Wiring Harness
S1 are 1" Pods.
S2 are 2" pods.
Squadron are 3" pods.
- S1: 2,375 lumens each
- S2 Sport: 1,130 lumens each
- S2 Pro: 2,450 lumens each
- Squadron Sport: 3,150 lumens each
- Squadron Pro: 4,800 lumens each
 Squadron Pro |  Squadron Sport |  S2 Pro |
S2 Sport |
 S1 |
COMPATIBILITY
Your truck must have a 7-pin trailer harness on the backside of the bumper. This harness must be able to disconnect as the included harness in our kit is an in-line connection. This means you will disconnect your factory 7-pin trailer harness and plug in our harness (your factory harnses then plugs into our provided harness). The back of your bumper will look similar to this, behind the trailer connection:
The rear of your bumper must also have 1 bolt on each side that our bracket can hang from. Most bumpers have some type of brace/support bar and bolts. If you look at your bumper, on the back side you'll want to look for one bolt on each side. In this photo you can see this truck has 2 bolts we can utilize to hang the light from using our supplied bracket.
INSTALLATION
1) Unplug your factory 7-pin trailer connection from behind your bumper
2) Plug the included 7-pin trailer harness into the factory harness
3) Plug the other end of the 7-pin trailer harness into your trailer connection on the back of your bumper
4) Route each leg of the wire harness to each side of the bumper
5) Mount the Baja Designs lights to the KR Off-Road brackets
6) Mount the KR Off-Road bracket to the back of your bumper utilizing factory bolts. The KR Off-Road brackets have a lot allowing you to raise/lower the lights to your preferred height
7) Plug the lights in and away you go!
